Overview product - HANDLE DRILL
Alphabetical product list » HANDLE DRILL
Different designs are displayed below.
For further product information click on number, name or image.
451-1 HANDLE DRILL |
two cutting edges • V-point • shank external thread M8 and cone 90° for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. Wegoma |
452-1 HANDLE DRILL |
two cutting edges • V-point and front drill 6x5 mm • shank external thread M8 and cone 90° for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. Wegoma |
460-8 HANDLE DRILL |
two cutting edges • centre point and spurs • right-hand rotation • shank external thread M6 and cone angle 16° for drilling handles in wood on e. g. Notter • Striffler |
461-8 HANDLE DRILL |
two cutting edges • V-point • shank external thread M6 and cone angle 16° for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. Notter • Striffler |
463-8 HANDLE DRILL |
two cutting edges • enforced centre point and spurs • right-hand rotation • shank external thread M6 and cone angle 16° for drilling handles in wood on e. g. Notter • Striffler |
471-2 HANDLE DRILL |
two cutting edges • V-point • right-hand or left-hand rotation • shank external thread M10 for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. Ayen • elumatec • Haffner • Mayer • Pertici • Striffler by request also available in coated design further lengths on inquiry |
472-2 HANDLE DRILL |
two cutting edges • V-point and front drill 6x5 mm • right-hand or left-hand rotation • shank external thread M10 for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. Ayen • elumatec • Haffner • Mayer • Pertici • Striffler by request also available in coated design further lengths on inquiry |
473-2 HANDLE DRILL |
two cutting edges • enforced centre point and spurs • landed flute • left-hand rotation • shank external thread M10 particularly for precise drilling of handles in wood on e. g. Ayen • Haffner • Mayer • Pertici • Striffler |
491-4 HANDLE DRILL |
two cutting edges • V-point • right-hand or left-hand rotation • shank external thread M10 and register 11x4 mm for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. elumatec • Federhenn • Pertici |
492-4 HANDLE DRILL |
two cutting edges • V-point and front drill 6x5 mm • right-hand or left-hand rotation • shank external thread M10 and register 11x4 mm for drilling handles in UPVC profiles with or without filling steel profile and aluminium profiles on e. g. elumatec • Federhenn • Pertici |